mattimber asked:

A fascinating insight to the secrets of Stan Meyer’s patents, and the principals behind the water fuel cell, David Wenbert, from the H2Earth Institute discusses the device in detail. This interview, along with the PES Moray King interview shed a bright light into this device, which is normally a high efficiency / over unity electrolyzer / capacitor, but when coupled with the Electron Extraction circuit, the device pulls off the free electrons in the charged HHO gas, making it a true fuel cell, plus a gas generator.

Everyone knows we need to get off fossil fuels, and we need to do it quickly. Manmade climate change aside, the air & water pollution from other toxins in fossil fuels is killing the planet. Add to this, we’ve gone through half the world’s crude supply in 100 years. China & India’s economies are now bursting online and mimicking the U.S. model. We’ll go through the last oil reserves in less than 50 years at the rate of consumption and projected demands.

650 coal plants are planned in China & India in 10 Yrs, doubling GHG emissions. In light of peak oil & exhausting the crude oil supply in 50 years, & the air & water pollution from petrochemicals, we need to transition to a new fuel source that can (1) Be burned in the ~1 Billion global internal combustion engines with minimal modifications (2) Not pollute the atmosphere with byproducts that damage the environment.

The most popular candidate for a non polluting energy for transportation has always been hydrogen. But the infrastructure for producing & storing hydrogen doesn’t exist & will be costly. Plus you don’t want to produce CO2 during the water electrolysis process, or via steam iron absorbing process. Using solar, wind or clean energy for the electrolysis is essential. You don’t want to make clean energy using dirty energy. Biofuels like sweet sorghum can help too.

Conventional electrolysis to produce separated gasses of H & O takes a great amount of energy compared to the return from burning it in an engine/generator. You’re lucky if you get 30% efficiency. Plus storage of the hydrogen gas is tricky and huge tanks are needed, unless liquefied, which takes a third more hydrogen energy to liquefy. In light of this, a way to electrolyze water and make more gas with less energy is critical to having in onboard water-top-fuel scenario.

The long time dream of filling your car with water & an efficient electrolyzer making a combustible gas from the water is under our noses. The answer is with the Water Fuel Cell. Although, unlike a traditional fuel cell, which mixes gasses & generates electricity, the water fuel cell produces gas from very little energy. An additional circuit called the Electron Extraction Circuit produces a current by pulling off the free electrons in the water gas (HHO), making it a true water fuel cell.

The water fuel cell produces a charged gas of diatomic & monatomic hydrogen & oxygen atoms, and free electrons. In traditional electrolysis the gasses are separated, and an acidic catalyst is added, which must be filtered out of the hydrogen gas. With the water fuel cell, it can turn any water source (such as salt water) into HHO gas. You can weld with it and cut through just about anything. The gas is used for SCUBA. If burned against nuclear waste, the waste is rendered inert.

HHO gas can power most internal combustion engines. When you burn the gas, it turns back into water! It’s the perfect solution to transportation fuel. The electrolyzers that make this gas can be purchased online at the Hydrogen Garage Store, National Vapor, Arizona Hydrogen, or get an HHO welder at Aquygen ( hytechapps (dot) com. OR Google Bob Boyce D9 PDF and build your own.

For those who are developing their own clean energy and zero-point energy systems, or for those who would like to be involved with this promotion, please visit:

http://www.theorionproject.org

HOWARD

raviwfc asked:

New Leads to WFC….Switched on at burnt out Ampearage….the brought it down to 0.5Amps. Lot of small bubble generation this time. WFC gets fogged.

Pl check the following links for replication info about this WFC:

http://www.panaceauniversity.org/Ravi%20Cell.pdf

(For the circuit use the pg.25 schematic but with individual ferrite core rods straight wound for the Inductors rather than a single rod and bifilar wound–not recommended)

Forums:

http://www.oupower.com/phpBB2/viewtopic.php?t=1602

http://www.overunity.com/index.php/topic,3079.0.html

For Downloads of Water Fuel Cell Files:

http://www.hotlinkfiles.com/browse/srawofni/33693

(or)

http://www.hotlinkfiles.com/browse/waterfuel/42765

http://www.web-space.tv/free-energy/Chapt10.html

http://waterfuel.t35.com/wf_meyer_ravi.html

Dave Lawton Approved Shop for components & kits of WFC:

http://www.courtiestown.co.uk/batteries/shop.htm

R.

JERRELL

Neither Republican nor Democrat asked:


sources: like solar panels to convert water to hydrogen to fuel our cars - we have the technology, just don’t want to spend the money to convert over. So what is the break off point: $10/gallon, $20/gallon?
do you think the oil companies know what that point is and won’t allow the cost to reach it so they can keep their stranglehold?

OTTO

mattimber asked:

A fascinating insight to the secrets of Stan Meyer’s patents, and the principals behind the water fuel cell, David Wenbert, from the H2Earth Institute discusses the device in detail. This interview, along with the PES Moray King interview shed a bright light into this device, which is normally a high efficiency / over unity electrolyzer / capacitor, but when coupled with the Electron Extraction circuit, the device pulls off the free electrons in the charged HHO gas, making it a true fuel cell, plus a gas generator.

Everyone knows we need to get off fossil fuels, and we need to do it quickly. Global warming aside, the air & water pollution from other toxins in fossil fuels is killing the planet. Add to this, we’ve gone through half the world’s crude supply in 100 years. China & India’s economies are now bursting online and mimicking the U.S. model. We’ll go through the last oil reserves in less than 50 years at the rate of consumption and projected demands.

650 coal plants are planned in China & India in 10 Yrs, doubling GHG emissions. In light of peak oil & exhausting the crude oil supply in 50 years, & the air & water pollution from petrochemicals, we need to transition to a new fuel source that can (1) Be burned in the ~1 Billion global internal combustion engines with minimal modifications (2) Not pollute the atmosphere with byproducts that damage the environment.

The most popular candidate for a non polluting energy for transportation has always been hydrogen. But the infrastructure for producing & storing hydrogen doesn’t exist & will be costly. Plus you don’t want to produce CO2 during the water electrolysis process, or via steam iron absorbing process. Using solar, wind or clean energy for the electrolysis is essential. You don’t want to make clean energy using dirty energy. Biofuels like sweet sorghum can help too.

Conventional electrolysis to produce separated gasses of H & O takes a great amount of energy compared to the return from burning it in an engine/generator. You’re lucky if you get 30% efficiency. Plus storage of the hydrogen gas is tricky and huge tanks are needed, unless liquefied, which takes a third more hydrogen energy to liquefy. In light of this, a way to electrolyze water and make more gas with less energy is critical to having in onboard water-top-fuel scenario.

The long time dream of filling your car with water & an efficient electrolyzer making a combustible gas from the water is under our noses. The answer is with the Water Fuel Cell. Although, unlike a traditional fuel cell, which mixes gasses & generates electricity, the water fuel cell produces gas from very little energy. An additional circuit called the Electron Extraction Circuit produces a current by pulling off the free electrons in the water gas (HHO), making it a true water fuel cell.

The water fuel cell produces a charged gas of diatomic & monatomic hydrogen & oxygen atoms, and free electrons. In traditional electrolysis the gasses are separated, and an acidic catalyst is added, which must be filtered out of the hydrogen gas. With the water fuel cell, it can turn any water source (such as salt water) into HHO gas. You can weld with it and cut through just about anything. The gas is used for SCUBA. If burned against nuclear waste, the waste is rendered inert.

HHO gas can power most internal combustion engines. When you burn the gas, it turns back into water! It’s the perfect solution to transportation fuel. The electrolyzers that make this gas can be purchased online at the Hydrogen Garage Store, National Vapor, Arizona Hydrogen, or get an HHO welder at Aquygen ( hytechapps (dot) com. OR Google Bob Boyce D9 PDF and build your own.

For those who are developing their own clean energy and zero-point energy systems, or for those who would like to be involved with this promotion, please visit:

http://www.theorionproject.org

TRENTON

dreamyear asked:

water fuel injector

MAN